Having scratched our name as the prominent provider of Adsorption and Desiccant Air Dryer, Our company doves into satisfying the requirement of different customers across the nation as well as that too in a period-efficient way. What's more, to label an element that backs our duties of opportune delivery and across the board reach is our incomprehensible distribution network. Further, this reality combined with quality evaluation that our company direct on our finished products has helping us to touch the wildernesses of 1 trader.
Micro heat regenerated adsorption dryers are operated in the twin-tower secondary operation manner. The compressed air comes into the dryer’s structure A via valve 1A (1B is closed), then is dried and dehydrated under the specific adsorption activity of the adsorbent. Processed gas flows to the gas utilizing point via valve 5A (5B is blocked); meantime about 5% dry air root comes into tower B via valve 4B (4A is closed) after being heated up by the heater, the surface-assimilative in which it is converted after a definite heating period. Cold blowing starts when heating is obstructed that cools down the adsorption bottom in the dryer’s column B (for utilization in the incoming cycle). Eventually, the air is released into the standard atmosphere via the assistance of muffler. Before changing in the second half period, valve 1B should be switched on and valve 2B should be switched off so as to tally the pressure level in the two towers as well as to insure the stability of the pressure when used with the gas. It also obviates the noise and impact of the dryer and the second half period activity gets started at the same time. (the dryer’s tower B operates and tower A converts). The process is kindred to that of the former half period.
Key Points :-